Roof rack Sprinter/Crafter

Roof rack system

Sprinter camper roof rack
Sprinter camper roof rack
Sprinter camper roof rack

The Dutchvanparts roof rack for Sprinter and Crafter is lightweight because it is made of 100% aluminium and designed to fit any Sprinter or Crafter van to your preference and price range. All parts are separately mounted on your roof rails. Whether you only want the loop, just install your solar panels or want to have it all, almost anything is possible. You can create your personal roof rack by choosing the parts you want.

 

All of our parts are mounted on a rails system (OEM MB rails or our own rails system). By using a rails we divide the weight across the roof. This also creates the option to remove the rack without access from the inside of the van later on. It is possible to position the loop and parts across the rails. In case you have a rear camera, you might need your roof rack slightly more forward than a van that does not have the camera. Same goes for the roof windows which might be located somewhat divergent.

Flooring components
Because all parts are separate you can always add or change flooring at any time. The flooring parts have standard sizes.

The solar panels are integrated on the roof rack on the same level as the flooring by using L-profile sleds. An overview of these parts is found on the flooring page.

roof rack example parts
Carry equipment

To carry more equipment above the flooring and solar panels we provide the round and L-profile cross bars. Think about sups, surfboards, kayaks or roof boxes (for example Thule rooftop cargo carriers). The roof rack is also compatible for wall awnings with legs such as Thule and Fiamma. These can be installed on the loop using the awning brackets.

Inspiration

Below you can see examples of how to arrange the flooring beams to create your personalized roof rack. however these are only examples. You can choose your design and parts. Whether you want more or less flooring, one or two Maxxfans, or zero or 3 solar panels, you can decide.

*note: solar panels are shown in dark blue*

L2 roof rack examples

Assem 2 keer victron 110W plus maxxfan
Example 1
  • Loop L2
  • 1 x 120mm flooring
  • 5 x 240mm flooring
  • 4 x Maxxfan
  • 1 x Solar set
  • 1 x back strip
Assem maxxvan plus dometic heki anders
Example 2
  • Loop L2
  • 2 x 120mm flooring
  • 7 x 240mm flooring
  • 4 x Heki
  • 2 x Maxxfan
  • 1 x back strip
Assem 120 strips
Example 3
  • Loop L2
  • 16 x 120mm flooring
Assem 2 keer victron 110W
Example 4
  • Loop L2
  • 2 x Solar set
Assem strips
Example 5
  • Loop L2
  • 7 x 240mm flooring
Assem maxxvan plus dometic heki
Example 6
  • Loop L2
  • 2 x 120mm
  • 7 x 240mm
  • 4 x Heki
  • 4 x Maxxfan
  • 1 x back strip

L3 roof rack examples

L3 model 2 keer maxfann full floring
Example 7
  • Loop L3
  • 1 x 120mm
  • 12 x 240mm
  • 8 x Maxxfan
  • 1 x back strip
L3 model 1 keer maxxfan en 3 keer 130w no floor
Example 9
  • Loop L3
  • 3 x solar set
L3 model 1 keer maxxfan en 3 keer 130w
Example 8
  • Loop L3
  • 6 x 240mm
  • 4 x Maxxfan
  • 3 x Solar set
  • 1 x back strip
L3 model 2 keer maxfann full floring 3 holes (2)
Example 10
  • Loop L3
  • 2 x 120mm
  • 9 x 240mm
  • 12 x Maxxfan
  • 1 x back strip